Profile Roll Cage & Round Roll Cage

There are quite a few different UTVs and side-by-sides out there with different types and sizes of roll cages. When choosing accessories that attach to the roll cage it is important to know the diameter of your side-by-side's roll cage. Below is a list of the most popular UTV make and models along with their respective roll cage diameters.

Round & Profile Roll Cages

UTV Roll Cage Types

There are two kinds of roll cages or ROPS found on UTVs, which include round cages and profile cages. Round cages use typical steel tube to form the roll cage. This is by far the most common roll cage found on UTVs. The second type of roll cage is a profile or Pro-Fit cage found on just a handful of UTVs listed below. A profile cage is not round but rather has a channel stamped into it with a flat surface making mounting accessories like windshields super easy. This channel also provides a very snug fit. It is important to note that some profile cages, such as the Polaris General, also have round steel tube cross tubes such as the one above the driver where a rearview mirror can be mounted. So be sure to check your entire roll cage. When choosing some accessories it is important to know the kind of roll cage is on your UTV. If you have any questions we are just an email, phone call, or chat away.  

Profile Cage or Pro-Fit Cage

Here is a close up of a profile cage or Pro-Fit cage.

 

UTVs With Profile Cages

Polaris General- All Models

Polaris Ranger- Full-size Rangers 2014+

Can-Am Maverick Trail, Sport, and Sport MAX

Can-Am Commander 2021+

 

UTV Roll Cage Sizes

 

Arctic Cat

Wildcat XX- 1.75"

Wildcat & Wildcat 4- 1.75"

 

Can-Am

Maverick X3 & Maverick X3 MAX- 1.875" for perimeter cage with most crossbars at 1.5" The rear harness bar is 2.5".

Maverick Sport & Maverick Sport MAX- These use a pro-fit ROPs system and require clamps that work with that kind of cage. All other crossbars are 1.85". Bumper is 

Maverick Trail- These use a Pro-Fit ROPs system and require clamps that work with that kind of cage. All other crossbars are 1.85".

Maverick & Maverick MAX- 2"

Commander 2021+- This uses a Pro-Fit ROPs/cage system and require clamps that work with that kind of cage.

Commander & Commander MAX- 2" 

Defender & Defender MAX- This uses a Pro-Fit ROPs/cage system and require clamps that work with that kind of cage.

 

Honda

Talon- 2"

Pioneer 1000- 1.75"

Pioneer 700- 1.625"

Pioneer 500- 1.625"

Big Red- 1.625"

 

Kawasaki

Teryx KRX 1000- 1.75" on the perimeter and 1.5" for crossbars.

Teryx & Teryx 4- 1.875" on the perimeter and 1.7" for crossbars.

 

Polaris

RZR Pro XP & XP 4- 2"

RZR XP & XP 4 Turbo S- 1.75"

RZR XP & XP 4 Turbo- 1.75"

RZR XP & XP 4 1000- 1.75"

RZR 1000 S & S4- 1.75"

RZR 900, 900 S, 4 900- 1.75" on the perimeter and 1.5" for crossbars, rear harness bar, and rear bumper crossbars.

RZR XP & XP 4 900- 1.75" on the perimeter and 1.5" for crossbars, rear harness bar, and rear bumper crossbars.

RZR 800, S 800, & 4 800- 1.75" on the perimeter and for crossbars, rear harness bar, and rear bumper crossbars.

RZR 570 & S 570- 1.75" on the perimeter and 1.5" for crossbars and rear harness bar.

RZR 170- 1.25"

General & General XP- Pro-Fit cage with 1.75" for front crossbar.

Ranger- Pro-Fit cage with 1.75" for rear harness bar.

Raner Crew- Pro-Fit cage

Ranger 2014 & Older- 1.75" on the perimeter and 1.5" for crossbars and rear harness bar.

 

Yamaha

YXZ1000R- 1.75" and 1.5" for crossbars

Viking & Viking VI- 2"

Wolverine RMAX, X2, & X4- 2" on the perimeter and 1.5" for crossbars

Rhino- 1.75" on the perimeter and 1.5" for crossbars