High Lifter RZR Upper Radius Rods With Spherical Bearings-10MM Bolt Size

Starting at $194.95
In stock
SKU
HL-RZR-XP-Upper-Radius-Rods-Spherical-10mm
Free Shipping On This Item

Free Shipping on most orders over $100

Flat $9.95 on orders under $100

Model Fitment
Polaris RZR XP 1000 2014-2017 Polaris RZR XP 4 1000 2014-2017 Polaris RZR XP 4 Turbo 2016 Polaris RZR XP Turbo 2016
Year fitment
2017 2016 2015 2014

Description

Stock radius bars don’t cut it! A bent radius bar will quickly lead to breakage or worse, being stranded. High Lifter radius bars are 50% larger than stock and maximize ground clearance with extreme arches to give you the most clearance possible while still protecting your axle.

High Lifter improved the radius bar design by adding durable, adjustable heim joints and spherical bearings. Installation and maintenance are made easy with adjustable length and can be serviced with readily available parts. The simple bolt-on kit features heim joints for easy camber adjustment and spherical bearings for rugged durability. High Lifter’s Radius Bars will give you the strength and clearance needed for peace of mind when riding.

Always check for bearing and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Related Products below to purchase replacement parts as needed.


Features

  • 50% larger than average stock bars - Crafted from 1 ¼” x .188” DOM steel tubing
  • Simple bolt-on kit
  • 5/8” heim joint
  • Spherical bearings
  • Most stock powder coat colors available in stock
  • Step by step instructions complete with multi-images for a quick install
  • Limited Lifetime Warranty

Note: 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket.

Note: This kit does not fit units that have 10mm factory bolts! You can find the kit below for 10mm RZR models.

Replacement Parts

Which can be found below.

Heim Joint - 18D

Spherical Bearing - PSRA-SBK-1

Spherical Bearing - PSRA-SBK-2

Specs
Brand High Lifter
Model Fitment Polaris RZR XP 1000 2014-2017, Polaris RZR XP 4 1000 2014-2017, Polaris RZR XP 4 Turbo 2016, Polaris RZR XP Turbo 2016
Write Your Own Review
You're reviewing:High Lifter RZR Upper Radius Rods With Spherical Bearings-10MM Bolt Size
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
Limited Lifetime