EMP RZR Extreme Front Bumper / Brush Guard With Winch Mount & LED Lights

Description

Polaris RZR Extreme Front Bumper / Brush Guard with Winch Mount and LED Lights

• Includes: Two Flush Mount LED Light Bars and wiring harness
• Made from 1/8" thick and 3/16" thick American Steel.
• Powder coated texture black for superior protection.
• Mounts behind the radiator, unlike factory bumpers.
• Fits most winches up to 3500 lbs.
• Allows you to mount your winch up high out of the mud and water or behind the radiator (see notes below if mounting behind the radiator).
• Top Mounting Accepts both wide Spool UTV Winches (6-5/8” x 3” deep, bolt pattern) and Standard Spool UTV Winches (4-7/8” Wide x 3” Deep, Bolt Pattern).
• Laser Cut and CNC Formed to ensure a perfect fit.
• Laser Cut EMP Logo.
• Made In Cleveland, Ohio.

If you are mounting a winch behind the radiator you will need a winch mount EMP- 12363 and an additional Fairlead (see install video).

NOTE: due to frame restrictions if you are mounting a winch behind the radiator you will not be able to use a wide spool winch. If mounting a winch on top you will only need the fairlead bracket that comes with your winch. If you do not have a fairlead bracket for some reason we do make one it is EMP-10906.

This is like our standard bumper but comes with (2) LED light bars, Universal Wiring Harness and the cut outs in the steel bumper.

If you have a turbo model you will have to trim a small slit into the front fascia for the arms that go back the frame. This will mostly be hidden behind the bumper. The turbo models have wider front Fascia. This is the 2017-18 models only. On the 2016 and 2019+ Models the front fascia was three pieces so the side pieces just have to be removed.

<iframe width="420" height="315" src="https://www.youtube.com/embed/Spw6m8qz-yw" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>